Solar Lantern Via 50W 500lm 6000K
- New
Product Details
EKO9093
Data sheet
Material: Polycarbonate + Aluminum + Glass
TENSION: 3.2V/5000mAh
NET WEIGHT: 1.32kg
WEIGHT OF BULK PACKAGING: 17.2kg
STREAM OF LIGHT: 500 Lm
HEIGHT (mm): 235mm
Description
Our solar lamp VIA has been designed as the ideal outdoor lighting solution for properties, gardens, entrance gates, parking lots, and squares. It features a 5000mAh 3.2V battery. The lamp charges from the sun during the day and lights up after dusk. It requires 5-6 hours for a full charge, and the operating time depends on the selected mode. The use of the solar lamp is cost-free. Lamps in this family come with a dusk-motion sensor. The fixture has lenses, giving the lamp a very wide and deep lighting angle: 140°*70°. Additionally, the built-in LED near the on/off button informs us about the battery charge level. The lamp comes with a remote control, allowing us to select the desired operating mode:
- ON – turns the lamp on in AUTO mode – the function works once
- OFF – turns the lamp off – the function works once
- Sun symbol on the left side of the remote – turns the light on at 100% power and stays at this power until the battery is discharged. The function works once.
- PIR – activates the motion sensor – without detecting motion, the lamp operates at 10% power; upon detecting motion, the lamp lights up at 100% and stays on for 20 seconds, then returns to 10% power. If you activate this mode, the lamp will work in this mode daily until another mode is activated.
- 3H – the lamp operates at 75% power and turns off after three hours. If you activate this mode, the lamp will operate in this mode daily until another mode is activated. So from the first activation, it will work for 3 hours and then turn off.
- 4H + PIR – the lamp operates in AUTO mode, and after 4 hours, the motion sensor is activated, working at 60% power for 20 seconds upon detecting motion, then switches to economy mode without motion, illuminating at 10% power until morning, the next motion detection, or when the battery level drops below 10%, at which point the lamp turns off. If you activate this mode, the lamp will work daily in this mode until another mode is activated.
- 6H – the lamp operates in AUTO mode and turns off after 6 hours. If you activate this mode, the lamp will work in this mode daily until another mode is activated.
- AUTO – the lamp lights up at 60% power and gradually dims over 12 hours until it reaches 8% power. This is a great mode because in households, it's important for the lamp to turn on around 5 PM during winter and shine with appropriate power, while at night, strong light is not necessary, but we want something to be lit, so the lamp will gradually dim and by morning, it will be at 8%. This way, we have light all night and protect the battery in the fixture.
A mounting bracket VIA – EKO9168 should be purchased separately for the lamps.
- ON – turns the lamp on in AUTO mode – the function works once
- OFF – turns the lamp off – the function works once
- Sun symbol on the left side of the remote – turns the light on at 100% power and stays at this power until the battery is discharged. The function works once.
- PIR – activates the motion sensor – without detecting motion, the lamp operates at 10% power; upon detecting motion, the lamp lights up at 100% and stays on for 20 seconds, then returns to 10% power. If you activate this mode, the lamp will work in this mode daily until another mode is activated.
- 3H – the lamp operates at 75% power and turns off after three hours. If you activate this mode, the lamp will operate in this mode daily until another mode is activated. So from the first activation, it will work for 3 hours and then turn off.
- 4H + PIR – the lamp operates in AUTO mode, and after 4 hours, the motion sensor is activated, working at 60% power for 20 seconds upon detecting motion, then switches to economy mode without motion, illuminating at 10% power until morning, the next motion detection, or when the battery level drops below 10%, at which point the lamp turns off. If you activate this mode, the lamp will work daily in this mode until another mode is activated.
- 6H – the lamp operates in AUTO mode and turns off after 6 hours. If you activate this mode, the lamp will work in this mode daily until another mode is activated.
- AUTO – the lamp lights up at 60% power and gradually dims over 12 hours until it reaches 8% power. This is a great mode because in households, it's important for the lamp to turn on around 5 PM during winter and shine with appropriate power, while at night, strong light is not necessary, but we want something to be lit, so the lamp will gradually dim and by morning, it will be at 8%. This way, we have light all night and protect the battery in the fixture.
A mounting bracket VIA – EKO9168 should be purchased separately for the lamps.
Solar Lantern Via 50W 500lm 6000K
Product Details
EKO9093
Data sheet
Material: Polycarbonate + Aluminum + Glass
TENSION: 3.2V/5000mAh
NET WEIGHT: 1.32kg
WEIGHT OF BULK PACKAGING: 17.2kg
STREAM OF LIGHT: 500 Lm
HEIGHT (mm): 235mm
Description
Our solar lamp VIA has been designed as the ideal outdoor lighting solution for properties, gardens, entrance gates, parking lots, and squares. It features a 5000mAh 3.2V battery. The lamp charges from the sun during the day and lights up after dusk. It requires 5-6 hours for a full charge, and the operating time depends on the selected mode. The use of the solar lamp is cost-free. Lamps in this family come with a dusk-motion sensor. The fixture has lenses, giving the lamp a very wide and deep lighting angle: 140°*70°. Additionally, the built-in LED near the on/off button informs us about the battery charge level. The lamp comes with a remote control, allowing us to select the desired operating mode:
- ON – turns the lamp on in AUTO mode – the function works once
- OFF – turns the lamp off – the function works once
- Sun symbol on the left side of the remote – turns the light on at 100% power and stays at this power until the battery is discharged. The function works once.
- PIR – activates the motion sensor – without detecting motion, the lamp operates at 10% power; upon detecting motion, the lamp lights up at 100% and stays on for 20 seconds, then returns to 10% power. If you activate this mode, the lamp will work in this mode daily until another mode is activated.
- 3H – the lamp operates at 75% power and turns off after three hours. If you activate this mode, the lamp will operate in this mode daily until another mode is activated. So from the first activation, it will work for 3 hours and then turn off.
- 4H + PIR – the lamp operates in AUTO mode, and after 4 hours, the motion sensor is activated, working at 60% power for 20 seconds upon detecting motion, then switches to economy mode without motion, illuminating at 10% power until morning, the next motion detection, or when the battery level drops below 10%, at which point the lamp turns off. If you activate this mode, the lamp will work daily in this mode until another mode is activated.
- 6H – the lamp operates in AUTO mode and turns off after 6 hours. If you activate this mode, the lamp will work in this mode daily until another mode is activated.
- AUTO – the lamp lights up at 60% power and gradually dims over 12 hours until it reaches 8% power. This is a great mode because in households, it's important for the lamp to turn on around 5 PM during winter and shine with appropriate power, while at night, strong light is not necessary, but we want something to be lit, so the lamp will gradually dim and by morning, it will be at 8%. This way, we have light all night and protect the battery in the fixture.
A mounting bracket VIA – EKO9168 should be purchased separately for the lamps.
- ON – turns the lamp on in AUTO mode – the function works once
- OFF – turns the lamp off – the function works once
- Sun symbol on the left side of the remote – turns the light on at 100% power and stays at this power until the battery is discharged. The function works once.
- PIR – activates the motion sensor – without detecting motion, the lamp operates at 10% power; upon detecting motion, the lamp lights up at 100% and stays on for 20 seconds, then returns to 10% power. If you activate this mode, the lamp will work in this mode daily until another mode is activated.
- 3H – the lamp operates at 75% power and turns off after three hours. If you activate this mode, the lamp will operate in this mode daily until another mode is activated. So from the first activation, it will work for 3 hours and then turn off.
- 4H + PIR – the lamp operates in AUTO mode, and after 4 hours, the motion sensor is activated, working at 60% power for 20 seconds upon detecting motion, then switches to economy mode without motion, illuminating at 10% power until morning, the next motion detection, or when the battery level drops below 10%, at which point the lamp turns off. If you activate this mode, the lamp will work daily in this mode until another mode is activated.
- 6H – the lamp operates in AUTO mode and turns off after 6 hours. If you activate this mode, the lamp will work in this mode daily until another mode is activated.
- AUTO – the lamp lights up at 60% power and gradually dims over 12 hours until it reaches 8% power. This is a great mode because in households, it's important for the lamp to turn on around 5 PM during winter and shine with appropriate power, while at night, strong light is not necessary, but we want something to be lit, so the lamp will gradually dim and by morning, it will be at 8%. This way, we have light all night and protect the battery in the fixture.
A mounting bracket VIA – EKO9168 should be purchased separately for the lamps.