Epad 5W 500lm 4000K Solar Floodlight

  • New
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Epad 5W 500lm 4000K Solar Floodlight
Previous keyboard_arrow_left
Next keyboard_arrow_right
zoom_in

Product Details

EKO9082

Data sheet

Material: ABS plastic + Polycarbonate
TENSION: 3.7V/3000mA
NET WEIGHT: 0.61kg
WEIGHT OF BULK PACKAGING: 13.3kg
STREAM OF LIGHT: 500 Lm
HEIGHT (mm): 31mm
DEPTH (mm): 149mm
POWER: 5W
WIDTH (mm): 235mm
COLOR: BLACK
Color of light: Neutral 4000K
Degree of Protection: IP65
FAMILY OF LAMPS: Solar lamps
REPLACEABLE LIGHT SOURCE: NO
DIMMING OPTION: No
Motion sensor: YES
Power supply: SOLAR PANEL - 2.3Wp Monocrystalline
Angle of illumination: 90°
AVERAGE LIFESPAN: 35000h
CRI [RA]: 80

Description

The EPAD solar floodlight is made from durable and high-quality materials that will serve your needs for years. It is waterproof, easy to install and operate, and is a versatile, excellent solution for outdoor lighting needs. Each LED has a lens, which makes the lighting area much larger than in lensless LEDs. The floodlight has a 3000mAh 3.7V battery, which takes 5-6 hours to fully charge, and the operating time depends on the selected mode - described in the manual. Say goodbye to expensive, unattractive, and unsightly outdoor lighting.
The lamps in this family have a dusk-motion sensor and have two operating modes:
- Sensor mode – if the battery is above 30%, the lamp turns on at 100% upon detecting motion. Motion sensor range: 120° <6m. Then, after 20 seconds without detecting motion, it switches to an economical mode at 30% power and stays that way until motion is detected again.
If the battery is below 30%, the lamp turns on at 100% upon detecting motion. Then, after 20 seconds without detecting motion, the lamp turns off.
- Continuous lighting mode – press the button for 3 seconds until the lamp flashes. After flashing, the lamp is in continuous lighting mode and has the dusk and motion sensor turned off, so it stays on until the battery runs out and automatically switches to sensor mode.

Epad 5W 500lm 4000K Solar Floodlight

×
Dane wejściowe dla symulatora rat
cena jednostkowa
ilość jednostek

Oblicz ratę!

zł174

Product Details

EKO9082

Data sheet

Material: ABS plastic + Polycarbonate
TENSION: 3.7V/3000mA
NET WEIGHT: 0.61kg
WEIGHT OF BULK PACKAGING: 13.3kg
STREAM OF LIGHT: 500 Lm
HEIGHT (mm): 31mm
DEPTH (mm): 149mm
POWER: 5W
WIDTH (mm): 235mm
COLOR: BLACK
Color of light: Neutral 4000K
Degree of Protection: IP65
FAMILY OF LAMPS: Solar lamps
REPLACEABLE LIGHT SOURCE: NO
DIMMING OPTION: No
Motion sensor: YES
Power supply: SOLAR PANEL - 2.3Wp Monocrystalline
Angle of illumination: 90°
AVERAGE LIFESPAN: 35000h
CRI [RA]: 80

Description

The EPAD solar floodlight is made from durable and high-quality materials that will serve your needs for years. It is waterproof, easy to install and operate, and is a versatile, excellent solution for outdoor lighting needs. Each LED has a lens, which makes the lighting area much larger than in lensless LEDs. The floodlight has a 3000mAh 3.7V battery, which takes 5-6 hours to fully charge, and the operating time depends on the selected mode - described in the manual. Say goodbye to expensive, unattractive, and unsightly outdoor lighting.
The lamps in this family have a dusk-motion sensor and have two operating modes:
- Sensor mode – if the battery is above 30%, the lamp turns on at 100% upon detecting motion. Motion sensor range: 120° <6m. Then, after 20 seconds without detecting motion, it switches to an economical mode at 30% power and stays that way until motion is detected again.
If the battery is below 30%, the lamp turns on at 100% upon detecting motion. Then, after 20 seconds without detecting motion, the lamp turns off.
- Continuous lighting mode – press the button for 3 seconds until the lamp flashes. After flashing, the lamp is in continuous lighting mode and has the dusk and motion sensor turned off, so it stays on until the battery runs out and automatically switches to sensor mode.
Loading...